eSun glittering Filament Etwinkling 1.75 mm 1 kg

【Shimmering plays spark and glossy effect on the surface of the printed object. Perfect for artistic and craft projects, vases, statuettes and any other 3D items from your printers that could benefit from a glittering sparkling look. Compatible with mostly FDM/FFF 3D printers.

【Stable dimensional tolerance】 minimum tolerance and small shrinkage - ensure consistent administration and stable prints, no clogging, extremely high print success, resulting in printed components that have excellent finish and are very accurate . (depending on the printer)

【Without knocking and clogging 】 Material with excellent circularity and very low tolerance of the diameter, it does not overlap or tangle. It melts, does not crack, does not contain bubbles. Print smoothly and repeatedly without blocking a nozzle or extruder.

【Environmental -friendly material】 silk PLA supplies a smooth and glossy effect to the basic PLA. ESUN fibers are made of original materials (not recycled), biodegradable and ecological, non -toxic and odorless, no possibility of harm to the user or the environment. Ideal for safe printing.

【Vacuum enclosed packaging】 Clean mass weight: 1 kg. ESUN FILAMENT Delivered in a drift -picked bag that keeps it dry and out of dust and foreign particles, prevents nozzles from clogging and providing smooth 3D models.

• string diameter: 1.75 ± 0.03 mm
• Design length: 340-350 mm
• coil size: diameter 200 mm - width 64 mm - center hole 52 mm
• Pack size: 216 x 202 x 76 mm
• Weight Package: 1,48 kg
• nozzle temperature: 190-220 ℃
• pad temperature: 25-80 ℃
• density: 1.41 g / cm3
• Melt Flow Index: 2.5 (190 ° C / 2.16kg) g / 10min
• tensile strength: 58 MPa
• Extension at a quarry point: 29%
• bend strength: 70 MPa
• Fault strength module: 2100 MPa
• notch toughness: 4 kj / ㎡
• deformation temperature: 67 (° C, 0.45MPA)
• Manufacturer: Esun