Wood Filament Oak 1.75 mm Spectrum 0.5 kg

The basis of Wood material is classic PLA combined with particles of ground wood. Such a material has a unique feature. Not only does it look like wood, but also retains the structure of real wood. Finished prints can be painted and machined.

• resistance to material deformation
• durability and stability of prints
• high quality

Advantages Spectrum Wood:

• from biodegradable raw materials
• printing of 0.4 mm nozzle
• Very easy print
• print surface
• prints with the appearance of real wood
• Possibility of grinding and painting
• Easy to separate the object from the printing area

The print string is wound on a transparent coil. The coil contains information about the type of material, diameter and recommended to the print temperature. Each coil is vacuum packed with a moisture absorber. Paper instructions on the operator inside. The whole in the original packaging fiber Spectrum.

General Information

Color: oak wood
Fiber diameter: 1.75 mm
Dimensional tolerance: ± 0.05 mm
print temperature: 190-220 ° C
Heated table: does not require SE
Pure weight: 500 g
Total weight including packaging: 800 g
coil dimensions: St. ext. - 20 cm,
st. ext. - 5,2 cm,
width - 5.5 cm

Physical and thermal properties of base material

Specific weight: 1.24 g /cm3
MFR (210 ° C /2,16 kg), g /10 min: 6 (Astm D1238)
Thermal stress temperature: 55 ° C < BR /> Tensile strength: 53 MPa (Astm D882)
Tensile strength: 60 MPa (Astm D882) impact: 16j/m (Astm D256)